Recording An Image From A Tape As A Still Image - Sony DCR- TRV24E Operating Instructions Manual

Recording an image from a tape
as a still image
Recording a still image from
external equipment
– DCR-TRV25E/TRV27E/TRV118E only
Before operation
Set DISPLAY in
(The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Play back the recorded tape, or turn the TV on
to see the desired programme.
The image of the external equipment is
displayed on the screen.
(3) Follow steps 3 and 4 on page 156.
Using the A/V connecting cable
TV
VCR/
: Signal flow/
Connect the yellow plug of the A/V connecting
cable to the video jack on the VCR or the TV.
If your TV or VCR has an S video jack
Pictures can be reproduced more faithfully by
using an S video cable (optional).
With this connection, you do not need to connect
the yellow (video) plug of the A/V connecting
cable.
Connect an S video cable (optional) to the S video
jacks of both your camcorder and the TV or VCR.
158
to LCD in the menu settings.
Yellow/
OUT
S VIDEO
VIDEO
(1)
(2)
(3)
A/V connecting cable (supplied)/
S VIDEO
AUDIO/
VIDEO