Superimposing A Title - Sony DCR- TRV24E Operating Instructions Manual

Superimposing a title

If you use a tape with cassette memory,
you can superimpose the title. When you
play back the tape, the title is displayed
for five seconds from the point where you
superimposed it.
(1) In the recording, standby mode, playback or
playback pause, press MENU, then select
TITLE in
(2) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select the
desired title, then press the dial. The title
flashes.
(4) Change the colour, size, or position, if
necessary.
1 Turn the SEL/PUSH EXEC dial to select
COLOUR, SIZE or POSITION, then press
the dial. The selected item appears.
2 Turn the SEL/PUSH EXEC dial to select
the desired item, then press the dial.
3 Repeat steps 1 and 2 until the title is laid
out as desired.
(5) Press the SEL/PUSH EXEC dial again to
complete the setting.
In the recording, playback or playback pause
mode:
The TITLE SAVE indicator appears on the
screen for five seconds and the title is set.
In the standby mode:
The TITLE indicator appears. When you press
START/STOP to start recording, TITLE SAVE
appears on the screen for five seconds, and
the title is set.
130
with the SEL/PUSH EXEC dial.
VACATION
(1)
,
(2)
(3)
(4)
1
2
3
(5)
1 2