Sony DCR- TRV24E Operating Instructions Manual page 63

Recording still images on a tape
– Tape Photo recording
Notes
•During tape photo recording, you cannot
change the mode or setting.
•When recording a still image, do not shake
your camcorder. The image may fluctuate.
•The tape photo recording does not work while
using the following functions. The
indicator flashes:
– Fader
– Digital effect
If you record a moving subject with the tape
photo recording
The picture may fluctuate when you play back
the still images on other equipment. This is not a
malfunction.
To use tape photo recording using the Remote
Commander
Press PHOTO on the Remote Commander. Your
camcorder records a picture on the screen
immediately.
To use the tape photo recording during
normal recording on a tape
You cannot check the image on the screen by
pressing PHOTO lightly. Press PHOTO deeper.
The still image is then recorded for about seven
seconds and your camcorder returns to the
standby mode.
To record still images with higher quality
(except DCR-TRV16E/TRV116E)
We recommend that you record on "Memory
Stick"s using the memory photo recording
(p. 150).
63