Checking Recordings - End Search/ Editsearch/Rec Review - Sony DCR- TRV24E Operating Instructions Manual

Checking recordings
– END SEARCH/
EDITSEARCH/Rec Review
You can use these buttons to check the recorded
picture or shoot so that the transition between the
last recorded scene and the next scene you record
is smooth.
END SEARCH
You can go to the end of the recorded section
after you record.
Press END SEARCH in the standby mode.
The last five seconds of the recorded section are
played back and your camcorder returns to the
standby mode. You can monitor the sound from
the speaker or headphones.
EDITSEARCH
You can search for the next recording start point.
Hold down the –/+ side of EDITSEARCH in the
standby mode. The recorded portion is played
back.
– : To go backward
+ : To go forward
Release EDITSEARCH to stop playback. If you
press START/STOP, recording begins from the
point you released EDITSEARCH. You cannot
monitor the sound.
48
EDITSEARCH
END
SEARCH