Device Information Panel - Extron electronics PVS 407D User Manual

To configure the settings for use with DHCP:
1. Select the Use DHCP check box.
2.
Click Apply. An IP address is automatically assigned to the device. Contact your IT
administrator for more information.
Click Cancel to exit the process without making any changes.
To configure the settings with a static IP address:
1. Ensure the Use DHCP check box is unchecked.
1. In the IP Address field, enter an IP address for the device.
2. In the Subnet Mask field, enter the subnet mask for the device.
3. In the Default Gateway field, enter the default gateway to be used.
4. Click Apply to apply the changes, or click Cancel to exit the process without
making any changes.
To reset the settings to factory default:
NOTE: The default TCP/IP settings are:
• IP address = 192.168.254.254
• Subnet Mask = 255.255.0.0
•
Default Gateway = 0.0.0.0
1. Click the Reset to Default button. A confirmation dialog box opens.
2. Click Reset to reset the settings, or Cancel the exit the operation and return to the
TCP/IP dialog box.

Device Information Panel

The Device Information panel is split in two areas: Device Info and
Firmware version.
Figure 52.
This section displays details of the device name, part number, model name, model
description, and firmware versions (for PoleVault switcher, wallplate 1 and wallplate 2).
Part number, model name, and model description are read only.
Device Information Panel Example
PVS 407D • Using the Internal Web Page 67