Extron electronics PVS 407D User Manual page 50

Figure 23. Deploy Configuration to Devices Window
To add devices to the list:
NOTE: The next several figures show the Pass-Thru screen. This occurs when you
select Pass-Thru in the Connection Types dialog box during previous steps.
1. Enter the IP address, password, and where appropriate Telnet and Pass-Thru details
in each field for a desired target device.
2.
Click Add. The list is populated with the device details.
3. Repeat steps 1 and 2 for each desired target device.
Figure 24. Deploy Configuration to Device Window Populated
Once the list is completed targets can be selected for deployment. As default, all
manually-added targets are preselected for deployment and have a check mark to the left
of the Device List.
To deploy the configuration to selected target devices:
1.
Determine which targets are selected for deployment. Users can uncheck or check
the check box column to select which devices they want to push the configuration to.
2. Click the Deploy button. The deployment begins, and the window initially updates
with the status of the deployment as Deploying or Pending. A progress bar, at top
left, graphs the deployment percentage completed.
PVS 407D • Using Extron Product Configuration Software 44