Extron electronics PVS 407D User Manual page 38

Command
Query part number
Query VoiceLift firmware
version
Query PVT wallplate 1
firmware version
Query PVT wallplate 2
firmware version
Query VoiceLift Receiver part
number
Query PVT wallplate 1 part
number
Query PVT wallplate 2 part
number
Reset (Zap) command
Reset all device settings
to factory defaults
Absolute system reset,
retain IP
NOTE: This reset is same as ZQQQ except it excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP
setting, and port mapping (Telnet/Web/direct access) in order to preserve communication with the device. (This reset is recommended after a
firmware update.) Also erases file system and passwords.
Erase all files from flash
(user) memory
NOTE: This reset only removes files created in the user space, and includes those created by the backup/restore functions, software configuration
tools, EDID settings, image captures, user-supplied HTML files, and so forth. Space being used by firmware for internal operations (such as
saving of non-volatile settings) is not removed.
Absolute system reset
NOTE: This command resets all device settings to factory default; however, firmware version remains the same.
ASCII Command Response
(host to switcher) (switcher to host)
N
<part number>]
Verbose mode 2/3
Pno<part number>]
34Q
x.xx.xxxx]
or E25]
Verbose mode 2/3 Ver34*x.xx.xxxx]
or Ver34*E25]
36Q x.xx.xxxx]
or E25]
Verbose mode 2/3
Ver36*x.xx.xxxx]
or Ver36*E25]
38Q
x.xx.xxxx]
or E25]
Verbose mode 2/3
Ver38*x.xx.xxxx]
or Ver38*E25]
34N 60-1637-01]
or 60-938-01]
or E25]
Verbose mode 2/3
Pno34*<part number>]
or Pno34*E25]
36N
60-1756-03 ]
or 60-1335-13 ]
or 60-1270-13 ]
or E25]
Verbose mode 2/3
Pno36*<part number>]
or Pno36*E25]
38N
60-1756-03 ]
or 60-1335-13 ]
or 60-1270-13 ]
or E25]
Verbose mode 2/3 Pno38*<part number>]
or Pno38*E25]
E
Zpx]
ZXXX}
E
Zpy]
ZY}
E Zpf]
ZFFF}
E
Zpq]
ZQQQ}
Additional Description
View the part number.
View firmware version.
E25 = device not present
View firmware version.
E25 = device not present
View firmware version.
E25 = device not present
View the part number.
E25 = device not present
60-1756-03 = PVT HD RGB
60-1335-13 = PVT HDMI RGB
60-1270-13 = PVT HDMI
E25 = device not present
60-1756-03 = PVT HD RGB
60-1335-13 = PVT HDMI RGB
60-1270-13 = PVT HDMI
E25 = device not present
E ZXXX command resets all video
and audio settings.
See Note below.
See Note below.
See Note below.
PVS 407D • SIS Communication and Control 32