Extron electronics PVS 407D User Manual page 52

NOTES:
• PCS verifies the correct MLC controller (MLC 104 IP Plus or MLC 226 IP series),
the PVS 407D model, Telnet port, pass-thru port and device
administrator password for each device in the list upon deploying the
configuration. PCS does not push the configuration to the device if one of the
above criteria is not valid and this is reflected in the Status column.
The user should click the Edit icon to correct the settings where needed. See
the "Deploy Configuration to Devices" section in the PCS-PVS 407D Help file
embedded in the PCS software for full details.
•
In addition if a device is not connected, not powered, or turned off, a
Device not found status is returned.
To stop deployment at any time click Stop (see
If a configuration has been successfully deployed to a target, the status is appended as
"Sent."
Figure 27. A Typical Successful Deployment Process
When deployment is completed click Close. If the list has not been saved, you are
prompted to save the list. See Saving and Opening the List of Target Devices section in
the PCS-PVS 407D Help file embedded in the PCS software for full details.
PVS 407D • Using Extron Product Configuration Software
figure 25 on the previous page).
46