2.
Choose the device from the Device Discovery list (TCP/IP or USB connection)
or select the Pass-Thru tab, depending on the desired connection method. For
devices where the IP address is known, but the device is not listed, select the
TCP/IP tab.
For a USB or TCP/IP connection, select a listed device (see
page).
For a Pass-Thru connection:
a.
Click the Pass-Thru tab.
b.
Enter the IP address of the connected MLC. When checked, the Show
Characters check box allows the user to see the password letters when typed
in.
c.
If applicable, enter the password of the connected MLC.
d.
Enter the Telnet Port for the connected MLC (default is 23).
e.
Enter the Pass-Thru Port number for the connected MLC (default is 2003).
Figure 20.
Example Connection via Pass-Thu Option
PVS 407D • Using Extron Product Configuration Software
figure 19
on previous
41