Extron electronics PVS 407D User Manual page 59

To enable and configure set the ducking settings:
1. Select the Enable Ducking check box. The ducking setting fields become active.
NOTE: When the Enable Ducking check box is left unchecked, then the
Threshold, Duck By, and Hold Time settings are grayed out and are not
available.
2. To set Threshold level, click the up and down arrows in the field, or enter a value.
The range is 0 to -60 dBFS.
3.
To set the Duck By level, click the up and down arrows in the field, or enter a value.
The range is 0 to +80 dB.
4. To set the Hold Time (in seconds), click the up and down arrows in the field, or
enter a value. The range is 0-10 seconds.
To set Paging Sensor sensitivity and Hold Time setting:
To adjust Paging Sensor sensitivity (0 to 100):
Click and drag the handle of the Input Gain slider, or click the up and down arrows in
the field below the slider, or enter a value in the field.
To adjust Paging Sensor Hold Time in seconds:
1. Select the Enable Paging Sensor check box. The Hold Time field become
active.
2. Click the up and down arrows in the field, or enter a value in the field. The range is 1
to 8 seconds.
Audio Files
This page contains a list of audio files within an audio library, and lists the audio files
copied to the switcher. In addition it has a volume adjustment slider.
NOTE: Audio files must be in .wav format and have a size limit of 124 kB.
Audio files can be added to or deleted from the library, played and renamed (if desired),
and then copied to the device list. Up to 20 audio files can be loaded to the device.
NOTE: Audio files in the device list cannot be played until the device is synced.
Audio files can be managed by removing, moving up or down in the list, playing from the
switcher, or saving a file to the library. In addition the device list can be exported as a .csv
file, that can be opened and saved in Excel
PVS 407D • Using Extron Product Configuration Software
or Notepad, or a similar program.
®
53