Extron electronics PVS 407D User Manual page 39

Command
IP system reset
NOTE: This resets only IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting and port mapping (telnet/
web/direct access) back to factory defaults.
IP Setup Commands
Set verbose mode
View verbose mode
Set unit name
24
Set unit name to factory
default
24
View unit name
Set date and time
24
View date and time
View GMT offset
X10!
KEY: = Default name
X10@
= Verbose mode
X10%
= Unit name
X10^
= Date and time
X11@
= GMT offset
E24 - Privilege violation
Set time zone
View time zone
List time zones
Set DHCP on
24
Set DHCP off
24
View DHCP mode
Set IP address
24
Read IP address
24
X10&
KEY: = On/Off status
X10(
= IP address
ASCII Command Response
(host to switcher) (switcher to host)
E
Zpq1]
1ZQQQ}
E X10@ }
CV Vrb
E } X10@]
CV
E X10% }
CN Ipn
E • }
CN Ipn
E } X10%]
CN
E X10^ }
CT Ipt
E } X10^]
CT
E } X11@]
CZ
Combination of model name and last 3 hex pairs of MAC address (for example PVS-407D-07-4B-E9).
0
= Clear/none, 1 = Verbose mode, 2 = Tagged responses for queries, 3 = Verbose mode and tagged
(where additional information responses is provided in response to a query)
Text string up to 24 characters drawn from the alphabet (A-Z), digits (0-9), minus sign/hyphen (-).
No blank or space characters are permitted.
Set local date and time format (MM/DD/YY-HH:MM:SS).
Greenwich Mean Time (GMT) offset value (-12:00 to 14:00).
This represent hours and minutes (hh:mm) offset from GMT.
E
<zonename> Tzon
}
*TZON *<description>
E } <zonename>
TZON
*<description>
E } <zonename>
*TZON
*<description>
...<zonename>
*<description>
E }
1DH Idh1
E }
0DH Idh0
E } X10&]
DH
E X10( }
CI Ipi
E } X10(]
CI
0=off/disable; 1=on/enable
xxx.xxx.xxx.xxx 192.168.254.254
(
X10@]
• X10%]
• X10!]
• X10^]
<zonename>
•
]
]
]
]]
]
]
• X10(]
= default)
PVS 407D • SIS Communication and Control
Additional Description
See Note below.
Enable or disable verbose mode and
tagged responses.
View the verbose mode.
X10%
Set the device name to .
Reset the device name to the factory
default.
View the device name.
X10^
Set the date and time to
View the device date and time.
View the GMT offset.
Set the time zone.
View the current time zone.
Lists all the time zones.
Turn on DHCP.
Turn off DHCP (default).
View the DHCP setting.
X10(
Set the IP address to .
View the current IP address.
.
33