Table of Contents
Advertisement
Software Connection
Open PCS from the Start menu or desktop shortcut. The Extron PCS window opens with the Device
Discovery panel displayed. Connect to the switcher using the Device Discovery panel or the TCP/IP panel.
NOTE: Connecting to PCS returns the switcher to normal operation from power save modes 1 and 2.
Figure 94.
PCS Window, Device Discovery Panel
Offline device configuration is not supported with the DXP HD 4K PLUS Series, but the configuration screens and
panels can still be viewed.
Device Discovery Panel
The Device Discovery panel displays accessible Extron devices connected directly to the PC or to a LAN or
WAN. Devices are identified and sorted by model, IP address, device name, or connection method.
NOTE: If your device does not appear on the device list, try either of the following:
•
Select a different network adapter (see
•
Connect to the device via TCP/IP (see
To sort the list of available devices:
1. Click the Device Discovery tab (see figure 94,
2. Click the desired column heading (
To select a network adapter:
If your device name does not appear on the device list, or if the list panel is empty, you may need to use a
different network adapter.
1. On the Device Discovery panel, click Network Adapter (see figure 94,
Network Adapter window opens, displaying the available network adapters with gateways. The currently
selected network adapter is highlighted (see
If you want to view all network adapters, including those with no gateways, select the Show All Network
Adapters checkbox (
To select a network adapter
TCP/IP Panel
) to sort the category in ascending or descending order.
2
figure
), then click Refresh (
2
on page 105).
).
1
95,
on the next page).
1
).
3
DXP HD 4K PLUS Series • Configuration Software
on page 103 ).
), on the previous page. The
5
103
Advertisement
Table of Contents
