Extron electronics PVS 407D User Manual page 56

Assigning EDIDs
To assign EDID to selected inputs:
1. From the table, select an available EDID (represented by a blue, green, or yellow
output display icon).
2. From the inputs screen (table of inputs) on the right, select the desired input or inputs
(see figure 32).
3. Click the Assign button to assign EDID to the selected input or inputs.
Figure 32. Assigning EDIDs
To assign EDID to all inputs:
1. From the EDID table, select an available EDID (represented by a blue, green, or yellow
output display icon).
2.
Click the Assign to All button.
NOTE: If you select Assign to All, all input boxes, checked or unchecked, are
ignored and the EDID is assigned to all inputs.
PVS 407D • Using Extron Product Configuration Software 50