Extron electronics PVS 407D User Manual page 74

Device name
To change the device name:
1. Click Edit. The Device Name dialog box opens.
2. In the name field, enter a desired name.
NOTE: The name can have alphanumeric characters and hyphen only. A hyphen
cannot be the first or last character. An incorrect name is ignored and the current
name is not changed.
3. Click Apply. The new name is applied, the dialog box closes, and the Host Name
(within the Communication pane) is also updated with the new name.
Click Cancel to exit the process without making any changes.
To reset the device name to factory default:
NOTE: The default name is a combination of the model name and last 3 pairs of the
MAC address (for example, PVS-407D-0A-1B-22).
1. Click the Reset to Default button. A confirmation dialog box opens.
2.
Click Yes to reset the settings, or No the exit the operation and return to the Device
Name dialog box.
Firmware version
This section displays firmware versions for the PoleVault switcher, wallplate 1 and
wallplate 2, and allows the user to update the firmware to the switcher.
NOTE: The latest firmware can be downloaded from the Extron
Downloading the Latest Switcher Firmware
website
on page 70 for method).
PVS 407D • Using the Internal Web Page
(see
68