Omron CS1W-LC001 Operation Manual page 77

Basic Procedure for Using the Loop Control Unit
6. Actual Operation
5) Set the Set Point and other settings on CX-Process Monitor.
Refer to the CX-Process Monitor Operation Manual.
Loop Control Unit
1) Tune the Loop Control Unit using the CX-Process Monitor. (For example,
change the settings and PID constants.)
Refer to the CX-Process Monitor Operation Manual.
2) Monitor PV and alarms on CX-Process Monitor.
Refer to the CX-Process Monitor Operation Manual.
CPU Unit
Peripheral port or RS-232C port
Run status
Run operation
Section 1-5
Set the Set Point and PID
constants, and monitor
PV and other settings on
CX-Process Monitor
running on the computer.
57