Omron CS1W-LC001 Operation Manual page 201

Description of FINS Commands
184
WRITE ITEM TO MULTIPLE FUNCTION BLOCKS
Function
Writes the specified ITEM to multiple function blocks.
Command format
Data
format
Data length
(bytes)
1) Number of ITEMs
Specify the number of ITEMs to write.
2) Parameter type
Specify function block addresses 0 to 999 within the range 0 to 03E7 Hex.
3) Write start address
Specify ITEM numbers 0 to 999 in the function block specified by
parameter type within the range 0 to 03E7 Hex.
Specifiable ITEMs are all ITEMs in all function blocks excluding the
sequence commands (ITEM011 onwards) in the Step Ladder Program
block (Block Model 301).
4) Data length
Specify the number of bytes to write.
Set the data length according to the ITEM to be written to.
Note 1 For details of the data length of each ITEM, refer to the rightmost column
"Data length (bytes)" in the ITEM Lists in Section 2 Description of Function
Blocks in the Function Block Reference Manual.
5) Write data
Write data to be written to the ITEM of the specified function block
Command code
Number
of ITEMs
02 Hex 43 Hex
1 1 2
Parameter Data
Write start
type (block length
address
address) (byte)
2 2 1
Á
Section 6-3
command code
02 43
Write
Á repeated
data
 Â