Creating A Patch From A Sample (Create Patch); If You're Starting From Patch Mode; If You're Starting From Performance Mode - Roland Fantom XR Owner's Manual

Editing a Sample
• Loop Start Fine
Fine adjustment of the Loop Start point.
Value: 0–255
• Loop End Fine
Fine adjustment of the End point.
Value: 0–255
6.
Press [EXIT] when you are finished.
Creating a Patch from a
Sample (Create Patch)
Here's how you can use the currently selected sample to create a
patch.
* You cannot execute this with more than one sample selected.

If you're starting from Patch mode

1.
In the Sample List screen, select the sample from which
you want to create a patch.
You can press OUTPUT knob to audition the selected sample.
2.
Press [MENU].
The Sample Utility screen will appear.
3.
Use or to select "Create Patch."
4.
Press [ENTER].
The Create Patch screen will appear.
fig.15-010
5.
Turn the VALUE dial or use [INC][DEC] to change the
"Tempo Sync" value.
If this is "ON," the Wave Tempo Sync parameter (p. 55) of the
assigned patch will be On.
6.
Press [ENTER].
A message will ask you for confirmation.
7.
Press [ENTER].
To cancel, press [EXIT].
124
If you're starting from
Performance mode
1.
In the Sample List screen, select the sample from which
you want to create a patch.
You can press OUTPUT knob to audition the selected sample.
2.
Press [MENU].
The Sample Utility screen will appear.
3.
Use or to select "Create Patch."
4.
Press [ENTER].
The Create Patch screen will appear.
5.
Press or to specify the part to which the new patch
is to be assigned.
fig.15-011
6.
Press [ENTER].
The Create Patch screen will appear.
fig.15-012
7.
Turn the VALUE dial or use [INC][DEC] to change the
"Tempo Sync" value.
If this is "ON," the Wave Tempo Sync parameter (p. 75) of the
assigned patch will be On.
8.
Press [ENTER].
A message will ask you for confirmation.
9.
Press [ENTER].
The sample will be assigned (as a patch) to the specified part.
To cancel, press [EXIT].
If you select another patch, the patch you assigned will be
replaced by that patch. If you want to keep the patch you
created, be sure to save it.