Integrated Fast Setup - 3Com CoreBuilder 7000 Installation & Start?Up Manual

C 6: C
56
HAPTER ONFIGURING THE
Integrated Fast
Setup
C B 7000 F
ORE UILDER
To log in to the LMA:
1 Enter your access level (default is admin)
2 Enter your password
After a successful login the LMA Main Menu is displayed as shown in
Figure 12.
CB7000 switch module - Main Menu:
==========
(1) SYS: Platform config ->
(2) LEM: Lan Emulation ->
(3) CON: Connections ->
(4) STS: Statistics ->
(5) DIA: Testing & Diagnostics ->
(6) FTR: ATM features
(7) LOG: Logout
(8) VER: Version
(9) FST: Fast Setup
Figure 12 LMA Main Menu
This section describes the Integrated Fast Setup procedure and contains
the following topics:
Setup Modes
Setup Procedure Sections
Entering Data
Navigation Aids
Integrated Fast Setup Operation
Use the Integrated Fast Setup procedure to configure the minimum set of
parameters needed to enable the CoreBuilder 7000 family ATM switch
and its attached devices to function in the network.
With this procedure you can configure both the CoreBuilder 7000 family
ATM switch card and all CoreBuilder 7X00 interface cards installed in it in
one session.
ATM S
AMILY WITCH