Fn 26: Tapopen: Open A Freely Definable Table - HEIDENHAIN TNC 320 User Manual

10
Programming: Special functions
10.6 Freely definable tables

FN 26: TAPOPEN: Open a freely definable table

With the function FN 26: TABOPEN you open a freely definable
table to be written to with FN 27 or to be read from with FN 28.
Only one table can be open in an NC program. A new
block with TABOPEN automatically closes the last
opened table.
The table to be opened must have the file name
extension .TAB.
Example: Open the table TAB1.TAB, which is saved in the
directory TNC:\DIR1.
56 FN 26: TABOPEN TNC:\DIR1\TAB1.TAB
344
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013