HEIDENHAIN TNC 320 User Manual page 491

Parameter settings
DisplaySettings
Display step for single axes
List of all available axes
Display step for position display in mm or degrees
0.1
0.05
0.01
0.005
0.001
0.0005
0.0001
0.00005 (display step software option)
0.00001 (display step software option)
Display step for position display in inches
0.005
0.001
0.0005
0.0001
0.00005 (display step software option)
0.00001 (display step software option)
DisplaySettings
Definition of unit of measure valid for the display
metric: Use metric system
inch: Use inch system
DisplaySettings
Format of NC programs and display of cycles
Program input in HEIDENHAIN conversational text or in DIN/ISO
HEIDENHAIN: Program input in BA MDI in conversational text dialog
ISO: Program input in BA MDI in DIN/ISO
Display in cycles
TNC_STD: Display cycles with comment texts
TNC_PARAM: Display cycles without comment texts
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
Machine-specific user parameters 16.1
16
491