Speed Of The Setting Test Runs - HEIDENHAIN TNC 320 User Manual

Conversational programming

Hide thumbs Also See for TNC 320:

Table of Contents

Speed of the Setting test runs

The most recently set speed remains active, even if

the power is interrupted, until you change it.

After you have started a program, the TNC displays the following

soft keys with which you can set the simulation speed:

Perform the test run at the same speed at which

the program will be run (programmed feed rates

are taken into account)

Increase the test speed incrementally

Decrease the test speed incrementally

Test run at the maximum possible speed (default

You can also set the simulation speed before you start a program:

Shift the soft-key row

Select the functions for setting the simulation

Select the desired function by soft key, e.g.

incrementally increasing the test speed

TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013