HEIDENHAIN TNC 320 User Manual page 350

11
Programming: Multiple Axis Machining
11.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
Function Required parameters
POINTS
Coordinates of any three
points in the plane to be
tilted
RELATIV
Single, incrementally
effective spatial angle
AXIAL
Up to three absolute or
incremental axis angles
A,B,C
RESET
Reset the PLANE
function
The parameter definition of the PLANE function is
separated into two parts:
The geometric definition of the plane, which
is different for each of the available PLANE
functions.
The positioning behavior of the PLANE function,
which is independent of the plane definition and is
identical for all PLANE functions, See "Specifying
the positioning behavior of the PLANE function",
page 365
The actual-position-capture function is not possible
with an active tilted working plane.
If you use the PLANE function when M120 is
active, the TNC automatically rescinds the radius
compensation, which also rescinds the M120
function.
Always use PLANE RESET to reset PLANE functions.
Entering 0 in all PLANE parameters does not
completely reset the function.
If you restrict the number of tilting axes with the
M138 function, your machine may provide only
limited tilting possibilities.
You can only use the PLANE functions with tool axis
Z.
The TNC only supports tilting the working plane with
spindle axis Z.
350
Soft key Page
360
362
363
352
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013