HEIDENHAIN TNC 320 User Manual page 6

Fundamentals
About this manual
About this manual
The symbols used in this manual are described below.
This symbol indicates that important notes about the
function described must be regarded.
This symbol indicates that there is one or more
of the following risks when using the described
function:
Danger to workpiece
Danger to fixtures
Danger to tool
Danger to machine
Danger to operator
This symbol indicates a possibly dangerous situation
that may cause light injuries if not avoided.
This symbol indicates that the described function
must be adapted by the machine tool builder. The
function described may therefore vary depending on
the machine.
This symbol indicates that you can find detailed
information about a function in another manual.
Would you like any changes, or have you found any
errors?
We are continuously striving to improve our documentation for you.
Please help us by sending your requests to the following e-mail
address: tnc-userdoc@heidenhain.de.
6
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013