HEIDENHAIN TNC 320 User Manual page 481

Setting Meaning
SMB option Options that concern the SMB file system
type: Options are given without space
characters, separated only by commas. Pay
attention to capitalization.
Options:
ip: IP address of the Windows PC to which
the control is to be connected
username: User name with which the
control should log in
workgroup: Workgroup under which the
control should log in
password: Password with which the control
is to log on (up to 80 characters)
Further SMB options: Input of further
options for the Windows network
Automatic Automount (YES or NO): Here you specify
connection whether the network will be automatically
mounted when the control starts up.
Devices that are not automatically mounted
can be mounted anytime in the program
management.
You do not need to indicate the protocol with the
TNC 320. It uses the communications protocol
according to RFC 894.
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
Ethernet interface
15
15.9
481