Magnification Or Reduction Of Details - HEIDENHAIN TNC 320 User Manual

Conversational programming

Hide thumbs Also See for TNC 320:

Table of Contents

Programming: Programming aids

Programming graphics

Magnification or reduction of details

You can select the graphics display by selecting a detail with the

frame overlay. You can now magnify or reduce the selected detail.

Select the soft-key row for detail magnification/reduction

(second row, see figure)

The following functions are available:

Show and move the frame overlay. Press and

hold the desired soft key to move the frame

Shrink the frame overlay – Press soft key for

Enlarge the frame overlay – Press soft key

Confirm the selected area with the WINDOW

DETAIL soft key

The RESET WORKPIECE BLANK soft key is used to restore the

original section.

If you have connected a mouse you can draw a

frame overlay with the left mouse button for the

area to be magnified. You can also use the mouse to

magnify or shrink the graphics.

TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013