HEIDENHAIN TNC 320 User Manual page 536

16
Tables and overviews
16.5 Functions of the TNC 320 and the iTNC 530 compared
Comparison: Differences in programming station
Function
Demo version
Demo version
Copying NC programs
Shifting the horizontal soft-key
row
536
TNC 320
Programs with more than 100
NC blocks cannot be selected, an
error message is issued
If nesting with PGM CALL results
in more than 100 NC blocks, there
is no test graphic display; an error
message is not issued
Copying to and from the directory
TNC:\ is possible with Windows
Explorer
Clicking the soft-key bar shifts the
soft-key row to the right, or to the
left
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
iTNC 530
Programs can be selected, max.
100 NC blocks are displayed,
further blocks are truncated in the
display
Nested programs can be
simulated.
TNCremo or file manager of
programming station must be
used for copying
Clicking any soft-key bar activates
the respective soft-key row