HEIDENHAIN TNC 320 User Manual page 359

The PLANE Function: Tilting the Working Plane (Software Option 1) 11.2
Input parameters
X component of base vector?: X component BX
of the base vector B (see figure at top right). Input
range: –9.9999999 to +9.9999999
Y component of base vector?: Y component BY
of the base vector B (see figure at top right). Input
range: –9.9999999 to +9.9999999
Z component of base vector?: Z component BZ
of the base vector B (see figure at top right). Input
range: –9.9999999 to +9.9999999
X component of normal vector?: X component
NX of the normal vector N (see figure at center
right). Input range: –9.9999999 to +9.9999999
Y component of normal vector?: Y component
NY of the normal vector N (see figure at center
right). Input range: –9.9999999 to +9.9999999
Z component of normal vector?: Z component
NZ of the normal vector N (see figure at lower
right). Input range: –9.9999999 to +9.9999999
Continue with the positioning properties, See
"Specifying the positioning behavior of the PLANE
function", page 365
NC block
5 PLANE VECTOR BX0.8 BY-0.4 BZ-0.42 NX0.2 NY0.2 NZ0.92 ..
Abbreviations used
Abbreviation Meaning
VECTOR
Vector
BX, BY, BZ
Base vector: X,
NX, NY, NZ
Normal vector: X,
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
Y and Z components
Y and Z components
11
359