HEIDENHAIN TNC 320 User Manual page 264

8
Programming: Q Parameters
8.8 Additional functions
Group name, ID no.
Reference point from touch
probe cycle, 360
Value from the active
datum table in the active
coordinate system, 500
Basic transformation, 507
Axis offset, 508
Active preset, 530
Read data of the current
tool, 950
264
Number Index
1 1 to 9
(X, Y, Z, A, B, C,
U, V, W)
2 1 to 9
(X, Y, Z, A, B, C,
U, V, W)
3 1 to 9
(X, Y, Z, A, B, C,
U, V, W)
4 1 to 9
(X, Y, Z, A, B, C,
U, V, W)
10 -
Line Column
Line 1 to 6
(X, Y, Z, SPA,
SPB, SPC)
Line 1 to 9
(X_OFFS,
Y_OFFS,
Z_OFFS,
A_OFFS,
B_OFFS,
C_OFFS,
U_OFFS,
V_OFFS,
W_OFFS)
1 -
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
Meaning
Last reference point of a manual touch
probe cycle, or last touch point from Cycle
0 without probe length compensation but
with probe radius compensation (workpiece
coordinate system)
Last reference point of a manual touch
probe cycle, or last touch point from Cycle
0 without probe length or probe radius
compensation (machine coordinate system)
Result of measurement of the touch probe
cycles 0 and 1 without probe radius or probe
length compensation
Last reference point of a manual touch
probe cycle, or last touch point from Cycle
0 without probe length or stylus probe
compensation (workpiece coordinate system)
Oriented spindle stop
Read values
Read the basic transformation of a preset
Read the axis offset of a preset
Read the number of the active preset
Tool length L
Tool radius R
Tool radius R2
Oversize for tool length DL
Tool radius oversize DR
Tool radius oversize DR2
Tool locked TL
0 = not locked, 1 = locked
Number of the replacement tool RT
Maximum tool age TIME1
Maximum tool age TIME2
Current tool age CUR. TIME
PLC status