Reading Machine Parameters - HEIDENHAIN TNC 320 User Manual

Reading machine parameters

Use the CFGREAD function to read out TNC machine parameters as
numerical values or as strings.
In order to read out a machine parameter, you must use the TNC's
configuration editor to determine the parameter name, parameter
object, and, if they have been assigned, the group name and index
Type Meaning
Key Group name of the
machine parameter
(if assigned)
Entity Parameter object
(the name starts
with "Cfg...")
Attribute Name of the
machine parameter
Index List index of a
machine parameter
(if assigned)
If you are in the configuration editor for the user
parameters, you can change the display of the
existing parameters. In the default setting, the
parameters are displayed with short, explanatory
texts. To display the actual system names of the
parameters, press the key for the screen layout and
then the SHOW SYSTEM NAME soft key. Follow the
same procedure to return to the standard display.
Each time you want to interrogate a machine parameter with the
CFGREAD function, you must first define a QS parameter with
attribute, entity and key.
The following parameters are read in the CFGREAD function's
dialog:
KEY_QS: Group name (key) of the machine parameter
TAG_QS: Object name (entity) of the machine parameter
ATR_QS: Name (attribute) of the machine parameter
IDX: Index of the machine parameter
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
Example Icon
CH_NC
CfgGeoCycle
displaySpindleErr
[0]
String parameters 8.11
8
291