HEIDENHAIN TNC 320 User Manual page 474

Conversational programming
Hide thumbs Also See for TNC 320:
Table of Contents

Advertisement

15
MOD functions
15.8 Setting up data interfaces
Data transfer software
For transfer of files to and from the TNC, we recommend using the
HEIDENHAIN TNCremo data transfer software. With TNCremo,
data transfer is possible with all HEIDENHAIN controls via the serial
interface or the Ethernet interface.
You can download the current version of TNCremo
free of charge from the HEIDENHAIN Filebase
(www.heidenhain.de, Services and Documentation,
Software, PC Software, TNCremoNT).
System requirements for TNCremo:
PC with 486 processor or higher
Windows 95, Windows 98, Windows NT 4.0, Windows 2000,
Windows XP , Windows Vista operating systems
16 MB RAM
5 MB free memory space on your hard disk
An available serial interface or connection to the TCP/IP network
Installation under Windows
Start the SETUP .EXE installation program with the file manager
(Explorer)
Follow the setup program instructions
Starting TNCremoNT under Windows
Click on <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, TNCremo automatically
tries to set up a connection with the TNC.
474
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013

Advertisement

Table of Contents
loading

Table of Contents