HEIDENHAIN TNC 320 User Manual page 434

Conversational programming

Hide thumbs Also See for TNC 320:

Table of Contents

Positioning with Manual Data Input

13.1 Programming and executing simple machining operations

Example 2: Correcting workpiece misalignment on machines

with rotary tables

For running a basic rotation with the 3-D touch probe, see

"Touch Probe Cycles in the Manual Operation and El. Handwheel

modes of operation," section "Compensating workpiece

misalignment," in the Cycle Programming User's Manual.

Write down the rotation angle and cancel the basic rotation

Select operating mode: Positioning with MDI

Select the axis of the rotary table, enter the

rotation angle you wrote down previously and set

the feed rate. For example. L C+2.561 F50

Conclude entry

Press the machine START button: The rotation of

the table corrects the misalignment

TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013