HEIDENHAIN TNC 320 User Manual page 526

16
Tables and overviews
16.5 Functions of the TNC 320 and the iTNC 530 compared
Function
Datum table:
Sorting function by values
within an axis
Resetting the table
Hiding axes that are not
present
Switching the list/form view
Inserting individual line
Transfer of actual position
values in individual axis to the
datum table per keystroke
Transfer of actual position
values in all active axes to the
datum table per keystroke
Using a key to capture the last
positions measured by TS
FK free contour programming:
Programming of parallel axes
Automatic correction of relative
references
Handling of error messages:
Help with error messages
Switching the operating mode
while help menu is active
Selecting the background
operating mode while help
menu is active
Identical error messages
Acknowledgment of error
messages
Access to protocol functions
Saving service files
526
TNC 320
Available
Available
Available
Switchover via split-screen key
Allowed everywhere,
renumbering possible after
request. Empty line is inserted,
must be filled with zeros
manually
Not available
Not available
Not available
With X/Y coordinates,
independent of machine type;
switchover with FUNCTION
PARAXMODE
Relative references in contour
subprograms are not corrected
automatically
Call via ERR key
Help menu is closed when the
operating mode is switched
Help menu is closed when F12
is used for switching
Are collected in a list
Every error message (even if
it is displayed more than once)
must be acknowledged, the
Delete all function is available
Log and powerful filter
functions (errors, keystrokes)
are available
Available. No service file is
created when the system
crashes
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
iTNC 530
Not available
Not available
Available
Switchover by toggle soft key
Only allowed at end of table.
Line with value 0 in all columns
is inserted
Available
Available
Available
Machine-dependent with the
existing parallel axes
All relative references are
corrected automatically
Call via HELP key
Operating mode switchover
is not allowed (key is non-
functional)
Help menu remains open when
F12 is used for switching
Are displayed only once
Error message to be
acknowledged only once
Complete log without filter
functions available
Available. A service file is
automatically created when the
system crashes