11
Programming: Multiple Axis Machining
11.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
Input parameters
Axis angle A?: Axis angle
is to be tilted. If entered incrementally, it is the
angle
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
is to be tilted. If entered incrementally, it is the
angle
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
is to be tilted. If entered incrementally, it is the
angle
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties, See
"Specifying the positioning behavior of the PLANE
function", page 365
Abbreviations used
Abbreviation
AXIAL
364
to which
by which
the A axis is to be tilted from its
to which
by which
the B axis is to be tilted from its
to which
by which
the C axis is to be tilted from its
Meaning
In the axial direction
the A axis
the B axis
the C axis
TNC 320 | User's Manual HEIDENHAIN Conversational Programming | 5/2013
NC block
5 PLANE AXIAL B-45 .....