Display Interface Mp-Group - HP MSR series Command Reference Manual

Views
VT interface view, MP-group interface view
Default command level
2: System level
Parameters
text: Interface description, a case-sensitive character string of 1 to 80 characters.
Examples
# Set the description for interface VT 10 to virtual-interface.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] description virtual-interface
# Set the description for interface MP-group 3 to mpgroup-interface.
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3] description mpgroup-interface

display interface mp-group

Use display interface mp-group to display information about the specified MP-group interface or all
existing MP-group interfaces.
Syntax
display interface mp-group mp-number [ brief ] [ | { begin | exclude | include } regular-expression ]
display interface [ mp-group ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
mp-number: Number of an existing MP-group interface.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in DOWN state and the causes. If you do not specify this
keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
21