Clear L2Protocol-Tunnel Counters - Cisco Catalyst 3120 Command Reference Manual

clear l2protocol-tunnel counters

clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command on the switch stack or on a
standalone switch to clear the protocol counters in protocol tunnel ports.
Syntax Description
interface-id
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(40)EX
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples
This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet1/0/3
Related Commands Command
show l2protocol-tunnel
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-56
clear l2protocol-tunnel counters [interface-id]
(Optional) Specify the interface (physical interface or port channel) for
which protocol counters are to be cleared.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
Description
Displays information about ports configured for Layer 2 protocol
tunneling.
OL-12248-01