Clear L2Protocol-Tunnel Counters - Cisco Catalyst 3550 Command Reference Manual

Chapter 2 Cisco IOS Commands

clear l2protocol-tunnel counters

Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
Syntax Description
interface-id
Defaults
This command has no defaults.
Command Modes Privileged EXEC
Command History Release
12.1(9)EA1
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples
This example shows how to clear Layer 2 protocol tunnel counters for Gigabit Ethernet interface 0/3:
Switch # clear l2protocol-tunnel counters gigabitethernet0/3
Related Commands Command
show l2protocol-tunnel
78-11195-09
clear l2protocol-tunnel counters [interface-id]
(Optional) Specify interface for which protocol counters are to be cleared.
Modification
This command was first introduced.
Description
Displays information about ports configured for Layer 2 protocol
tunneling.
Catalyst 3550 Multilayer Switch Command Reference
clear l2protocol-tunnel counters
2-37