Nortel 2350 Installation And Basic Configuration Manual page 72

72 WSS Setup Methods
3
Configure a default route through the local gateway:
2361# set ip route default 192.168.1.1 0
success: change accepted.
4
Configure the default DNS domain name:
2361# set ip dns domain example.com
Domain name changed
5
Configure an IP alias to map the WLAN Management Software server IP address to the well-known
name wlan-config-srv:
2361# set ip alias wlan-config-srv 172.16.22.84
6
Enable the auto-config option:
2361# set auto-config enable
success: change accepted.
7
Create a self-signed administrative certificate, to enable the WSS to communicate with WLAN
Management Software :
2360# crypto generate key admin 1024
key pair generated
2360# crypto generate self-signed admin
Country Name:
State Name:
Locality Name:
Organizational Name:
Organizational Unit:
Common Name: remoteswitch1@example.com
Email Address:
Unstructured Name:
Self-signed cert for admin is
-----BEGIN CERTIFICATE-----
MIICUzCCAbygAwIBAgICA+cwDQYJKoZIhvcNAQEEBQAwNjELMAkGA1UEBhMCVVM
x
CzAJBgNVBAgTAkNBMRowGAYDVQQDFBF0ZWNocHVic0B0cnB6LmNvbTAeFw0wMzA
0
...
Lm8wmVYLxP56MpCUAm9O8C2foYgOY40=
-----END CERTIFICATE-----
8
Save the configuration changes:
2361# save config
success: configuration saved.
Example 3: Deployment Site Has DNS But No DHCP
The deployment site in this example does not have a DHCP server but does have a local DNS server. The configuration
is similar to Example 1, but includes DNS configuration information instead of an IP alias.
320656-A