Nortel 2350 Installation And Basic Configuration Manual page 73

1
Configure a VLAN:
2361# set vlan 1 port 7
success: change accepted.
2
Configure an IP interface on the VLAN.
2361# set interface 1 ip 192.168.1.252 255.255.255.0
success: change accepted.
3
Configure a default route through the local gateway:
2361# set ip route default 192.168.1.1 0
success: change accepted.
4
Configure the default DNS domain name:
2361# set ip dns domain example.com
Domain name changed
5
Configure DNS server information:
2361# set ip dns server 192.168.11.2
6
Enable the WSS Software DNS client:
2361# set ip dns server enable
success: change accepted.
7
Enable the auto-config option:
2361# set auto-config enable
success: change accepted.
8
Create a self-signed administrative certificate, to enable the WSS to communicate with WLAN
Management Software :
2360# crypto generate key admin 1024
key pair generated
2360# crypto generate self-signed admin
Country Name:
State Name:
Locality Name:
Organizational Name:
Organizational Unit:
Common Name: remoteswitch1@example.com
Email Address:
Unstructured Name:
Self-signed cert for admin is
-----BEGIN CERTIFICATE-----
MIICUzCCAbygAwIBAgICA+cwDQYJKoZIhvcNAQEEBQAwNjELMAkGA1UEBhMCVVM
x
CzAJBgNVBAgTAkNBMRowGAYDVQQDFBF0ZWNocHVic0B0cnB6LmNvbTAeFw0wMzA
0
...
Lm8wmVYLxP56MpCUAm9O8C2foYgOY40=
WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
WSS Setup Methods 73