Nortel 2350 Installation And Basic Configuration Manual page 139

Table 12: Configuration Parameter List (continued)
Configuration
Parameters
9. Certificates
Certificates (cont.)
10. Country code
11. Local user VLAN
WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Configuring a 2350 Switch for a Branch Office 139
CLI Commands
For certificates signed by a CA:
To install from PKCS #12 file:
copy tftp://ip-addr/[subdirname/]filename [destination-url]
crypto otp {admin | eap | webaaa} one-time-password
crypto pkcs12 {admin | eap | webaaa} file-location-url
To install from PKCS #7 file:
crypto generate key {admin | eap | ssh | webaaa}
{512 | 1024 | 2048}
crypto generate request {admin | eap | webaaa}
crypto certificate {admin | eap | webaaa}
PEM-formatted-certificate
crypto ca-certificate {admin | eap | webaaa}
PEM-formatted-certificate
Note: After you generate or install a certificate, do not create the key
pair again. If you do, the certificate might not work with the new key,
in which case you will need to regenerate or reinstall the certificate.
For certificates signed by the 2350 itself:
crypto generate key {admin | eap | ssh | webaaa}
{512 | 1024 | 2048}
crypto generate self-signed {admin | eap | webaaa}
Note: After you generate or install a certificate, do not create the key
pair again. If you do, the certificate might not work with the new key,
in which case you will need to regenerate or reinstall the certificate.
set system countrycode code
set vlan vlan-num name name
set vlan {vlan-num | name} port 1 tag tag-num
show vlan