Nortel 2350 Installation And Basic Configuration Manual page 122

122 Configuring a 2370, 2360, or 2380 Switch for Basic Service
Figure 25. Offload User Authentication
TLS
User A
Configuring RADIUS Servers for Offload Authentication
(See "Configuring RADIUS Servers for Pass-Through Authentication" on page
configuring a RADIUS server group are exactly the same for offload and pass-through user authentication.
Configuring the Authentication Protocol for Offload Authentication
To configure the authentication protocol for 802.1X users, use the following command. A user glob represents
a set of users.
set authentication dot1x {ssid ssid-name | wired} user-glob [bonded] protocol
method1 [method2] [method3] [method4]
320656-A
Certificate
authority
Router
MS-CHAP-V2
WSSwitch
Server
certificate
Certificate
authority
certificate
AP AP
RADIUS
server
User
A
118.) The commands for