Status Leds - Nortel 2350 Installation And Basic Configuration Manual

Status LEDs

The WSSs have LEDs that indicate port, power, and CPU status.
2360, 2380, and 2370 LEDs
Table 2 lists the LEDs for models 2370, 2360, and 2380.
.
LED
Mgmt
(2370 and 2380 only)
Power supply status
Gigabit fiber link
activity
(2370 and 2380 only)
Gigabit copper link
activity
(2370 and 2380 only)
Link
(2370 and 2360 only)
WLAN—Security Switch 2300 Series Installation and Basic Configuration Guide
Table 2: WSS Status LEDs—2370, 2360, 2380
Appearance
Bright green, then fade
(repeated)
Note: This LED appearance
is sometimes called
breathing.
Blinking green
Quickly blinking amber
Solid green
Solid amber
Unlit
Solid green
Blinking amber (2370)
Blinking green (2380)
Solid green
Blinking green
Solid green
Solid amber
Blinking green
Blinking amber
WLAN—Security Switch Overview 27
Meaning
WSS is operating normally.
WSS is booting.
WSS was unable to boot completely.
DC power output is on.
Power fault has occurred.
AC power is off.
1000-Mbps fiber link is operational.
Traffic is active on the 1000-Mbps fiber link.
Traffic is active on the 1000-Mbps fiber link.
1000-Mbps copper link is operational.
Traffic is active on the 1000-Mbps copper
link.
100-Mbps link is operational.
10-Mbps link is operational.
Traffic is active on the 100-Mbps link.
Traffic is active on the 10-Mbps link.