Display Mpls Static-L2Vc - HP 5800 series Command Reference Manual

Receives discarded
Packets sent
Sends discarded
Tunnel ID
Tunnel ID
Table 110 Command output
Field
Total PW Entry
In Interface
Service Instance ID
In VC Label
Out VC Label
Out Interface
MTU
Control Word
Tunnel ID

display mpls static-l2vc

Description
Use the display mpls static-l2vc command to display information about static VCs configured on the
router.
If you specify an interface, the command displays only information about static VCs configured on the CE
interface.
Syntax
display mpls static-l2vc [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a CE interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
: 0
: 0
: 0
: 0x878ae001(Done)
GRCount: 1
: 0x878ad002(Waiting)
GRCount: 1
Description
Total number of VPWS PW entries, which is displayed
only when you display all VPWS PW entries
Incoming interface, which is bound to L2VPN
Service instance ID
Incoming VC label
Outgoing VC label
Outgoing interface, valid in local CCC mode
Maximum transmission unit
Whether control word is used
Public tunnel ID and entry state (Done or Waiting)
GrCount: Number of times that GR occurs
255