Display Igmp-Snooping Static-Group - HP 5900 Series Command Reference Manual

Examples
# Display dynamic router port information for VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
XGE1/0/1
XGE1/0/2
Table 3 Command output
Field
VLAN 2
Router slots (0 in total)
Router ports (2 in total)
(00:01:30)
Related commands
reset igmp-snooping router-port

display igmp-snooping static-group

Use display igmp-snooping static
Syntax
display igmp-snooping static
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
239.255.255.255. If you do not specify a multicast group, the command displays static IGMP snooping
forwarding entries for all multicast groups.
source-address: Specifies a multicast source by its IP address. If you do not specify a multicast source, the
command displays static IGMP snooping forwarding entries for all multicast sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays static IGMP snooping forwarding entries for all VLANs.
(00:01:30)
(00:00:23)
Description
VLAN ID.
Member IDs of the member devices that have router ports and the total number of
the member devices (excluding the specified member device).
Dynamic router ports, and the total number of the dynamic router ports.
Remaining aging time for the dynamic router port.
•
For a global port, this field is always displayed.
•
For a non-global port, this field is displayed if the port is on the master device.
Otherwise, you must specify the slot slot-number option to display this field.
group to display static IGMP snooping forwarding entries.
-
group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot
-
5