Display Vsi - HP 5800 series Command Reference Manual

Field
LinkID
VCState
# Display the detailed information of VPLS connections of VPLS instance aaa.
<Sysname> display vpls connection vsi aaa verbose
VSI Name: aaa
**Remote Vsi ID
VC State
Encapsulation
Group ID
MTU
Peer Ip Address
PW Type
Local VC Label
Remote VC Label
Link ID
Tunnel Policy
Tunnel ID
Table 85 Command output
Field
VSI Name
Signaling
Remote Vsi ID
VC State
Encapsulation
MTU
Peer Ip Address
PW Type
Link ID
NOTE:
You can use VCCV to verify the connectivity of a PW only if the two peers support at least one identical
CC type and one identical CV type.

display vsi

Description
Use the display vsi command to display information about a specific VPLS instance or all VPLS instances.
Related commands: vsi.
Description
ID of the PW in the VPLS instance
Status of the VC
Signaling: ldp
: 500
: up
: vlan
: 0
: 1500
: 1.1.1.9
: label
: 1024
: 1024
: 1
: --
: 0x3703ae
Description
Name of the VPLS instance
PW signaling protocol used by the VPLS instance
ID of the VPLS instance
Status of the virtual circuit
Encapsulation type of the VPLS instance
Maximum transmission unit of the VPLS instance
IP address of the peer of the VPLS instance
PW type, which can be:
•
label: NPW, the PW with a PE
•
MEHVPLS: UPW, the PW with a UPE
ID of the PW in the VPLS instance
212