Mpls Rsvp-Te Reliability - HP 5800 series Command Reference Manual

Enable RSVP-TE before you configure the keep multiplier.
Related commands: mpls rsvp-te timer refresh.
Syntax
mpls rsvp-te keep-multiplier number
undo mpls rsvp-te keep-multiplier
View
MPLS view
Default level
2: System level
Parameters
number: Specifies the keep multiplier, ranging from 3 to 255.
Examples
# Set the keep multiplier to five.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te keep-multiplier 5

mpls rsvp-te reliability

Description
Use the mpls rsvp-te reliability command to enable the reliability mechanism of RSVP-TE—the
Message_ID extension mechanism.
Use the undo mpls rsvp-te reliability command to disable the reliability mechanism.
Syntax
mpls rsvp-te reliability
undo mpls rsvp-te reliability
View
Interface view
Default level
2: System level
Parameters
None
Examples
# Enable the reliability mechanism of RSVP-TE on VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] mpls rsvp-te reliability
165