Display Ccc - HP 5800 series Command Reference Manual

# Display L2VPN information with the RD being 100:1, the CE ID being 4, and the label offset being 0 in
the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4 label-offset 0
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
nexthop:3.3.3.9,
label base:132096,label range:10,layer-2 mtu:0,encap type:Unknown or Reserved
label
132096
132097
132098
132099
132100
132101
132102
132103
132104
132105
Table 94 Command output
Field
Origin codes
nexthop
pref
as-path
encap type

display ccc

Description
Use the display ccc command to display information about CCC connections.
If you do not specify the connection name or type, this command displays information about all CCC
connections.
Syntax
display ccc [ ccc-name ccc-name | type { local | remote } ] [ | { begin | exclude | include } regular-
expression ]
pref :100, as-path :
state
down
up
down
down
down
down
down
down
down
down.
Description
Route origin codes, which can be:
i – IGP—Indicates that the network layer reachability
information is from within the AS
e – EGP—Indicates that the network layer
reachability information is learned through EGP
? – incomplete—Indicates that the network layer
reachability information is learned through other
ways
IP address of the next hop
Preference
AS-PATH of the route
Encapsulation type
241