Display Mpls Ldp Session All Statistics; Display Mpls Lsp - HP 5800 series Command Reference Manual

Commands and command syntax options
Hide thumbs Also See for 5800 series:
Table of Contents

Advertisement

display mpls ldp session all statistics

Description
Use the display mpls ldp session all statistics command to display statistics about all LDP sessions.
Syntax
display mpls ldp session all statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display statistics about all LDP sessions.
<Sysname> display mpls ldp session all statistics
Total number of sessions : 1024
Session(s) in Non-Existent state
Session(s) in Initialized state
Session(s) in Open-Received state : 400
Session(s) in Open-Sent state
Session(s) in Operational state

display mpls lsp

Description
Use the display mpls lsp command to display information about LSPs.
With no parameters specified, the command displays information about all LSPs.
Related commands: display mpls lsp, display mpls static-lsp and display mpls statistics lsp.
This command supports only VLAN interfaces and Layer 3 Ethernet interfaces.
Syntax
display mpls lsp [ incoming-interface interface-type interface-number ] [ outgoing-interface interface-type
interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ asbr | [ vpn-instance vpn-
instance-name ] [ protocol { bgp | bgp-ipv6 | crldp | ldp | rsvp-te | static | static-cr } ] ] [ egress |
ingress | transit ] [ { exclude | include } dest-addr mask-length ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
: 100
: 200
: 300
: 24
70

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5820x series

Table of Contents