Next Hop; Opaque-Capability - HP 5800 series Command Reference Manual

Parameters
enable: Enables the MPLS TE capability in the OSPF area.
Examples
# Enable the MPLS TE capability in OSPF area 1.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] mpls-te enable

next hop

Description
Use the next hop command to define a node on the explicit path. By performing this command multiple
times, you may define all nodes that the explicit path must traverse in sequence.
By default, next hops are strict hops on an explicit path.
Related commands: delete hop.
Syntax
next hop ip-address [ include [ loose | strict ] | exclude ]
View
Explicit path view
Default level
2: System level
Parameters
ip-address: Defines a node by its link IP address or router ID in dotted decimal notation. In the strict
routing approach, this IP address must be a link IP address. In the loose routing approach, this IP address
can be either a link IP address or a router ID.
include: Includes the specified IP address on the explicit path.
loose: Indicates that the next hop is a loose node that is not necessarily directly connected to current node.
strict: Indicates that the next hop is a strict node that must be directly connected to current node.
exclude: Excludes the specified IP address from the explicit path.
Examples
# Exclude IP address 10.0.0.125 from the MPLS TE explicit path p1.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] next hop 10.0.0.125 exclude

opaque-capability

Description
Use the opaque-capability command to enable the opaque LSA capability for the OSPF process to
generate and receive from its neighbors Opaque LSAs.
192