Display Mpls Lsp Bfd - HP 5800 series Command Reference Manual

Field
IS-IS Level-1 Traffic Engineering Status
IS-IS Level-2 Traffic Engineering Status
display mpls lsp bfd te
Description
Use the display mpls lsp bfd te command to display the BFD information for MPLS TE tunnels.
Syntax
display mpls lsp bfd [ te tunnel tunnel-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
tunnel tunnel-number: Displays the BFD information of the specified MPLS TE tunnel. tunnel-number is the
tunnel interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the BFD information of the MPLS TE tunnel using tunnel interface Tunnel 0.
<Sysname> display mpls lsp bfd te Tunnel 0
-----------------------------------------------------------------------------
FEC
Local Discr
Tunnel ID
Session State
Session Role
Total Session Num: 1
Table 48 Command output
Field
Type
MPLS BFD Session(s) Information
: Tunnel0
: 3
: 0xd2009
: Up
: Active
Description
Type of the tunnel detected by BFD, which can be LSP or TE Tunnel
Description
TE state of Level-1 router
TE state of Level-2 router
Type : TE Tunnel
Remote Discr : 3
NextHop : ----
Source IP : 1.1.1.1
124