Display Mpls Te Tunnel - HP 5800 series Command Reference Manual

Syntax
display mpls te link-administration admission-control [ interface interface-type interface-number ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and a number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the CR-LSPs carried on the links of all interfaces.
<Sysname> display mpls te link-administration admission-control
LspID
1.1.1.9:1024
1.1.1.9:2048
Table 65 gives the description on the fields of the display mpls te link-administration admission-control
command.
Table 65 Command output
Field
LspID
In/Out IF
S/H Prio
CT
BW(kbps)

display mpls te tunnel

Description
Use the display mpls te tunnel command to display information about MPLS TE tunnels.
Syntax
display mpls te tunnel [ destination dest-addr ] [ lsp-id lsr-id lsp-id ] [ lsr-role { all | egress | ingress |
remote | transit } ] [ name name ] [ { incoming-interface | outgoing-interface | interface } interface-type
interface-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
In/Out IF S/H Prio
---/Vlan3 7/7
---/Vlan4 7/7
CT BW(kbps)
0 0
0 0
Description
ID of an LSP carried on a link
Incoming/Outgoing interface
Setup and holding priorities of CR-LSP
Service class type
Bandwidth (in kbps)
145